News

Glass Cutting Machine Maintenance

The maintenance of glass cutting machines involves many aspects, including the inspection and maintenance of the gas circuit, machinery, circuit and other parts.

Inspection of the gas circuit: It is necessary to ensure that the inlet pressure of the gas source processor is between 0.4 and 0.6 bar, check whether there is air leakage in the manual or mechanical valve, and clean the air pipe regularly to prevent bending. In addition, the vacuum pump should be regularly inspected and the vacuum pump oil should be replaced every six months.

Maintenance of the mechanical part: Including cleaning the surface of the screw rod and re-adding butter, checking the operation of the loading motor, and ensuring the normal operation of the sensor and the rack of the cutting machine. Inspection of the blade angle and cutting line is also necessary to ensure cutting accuracy.

Maintenance of the circuit part: Common faults such as reduced cutting speed and uneven cutting line may be caused by inconsistent tightness of the synchronous belt or circuit board failure. Solutions include adjusting the tightness of the synchronous belt and replacing the appropriate cutter wheel.

Other common problems and solutions: Including changes in cutting size, no floating function, and inability to return to the mechanical origin, which may be caused by damage to the proximity switch or damage to the fan. The solution is to replace related parts. ‌

By regularly checking and maintaining these key components, you can effectively extend the service life of the glass cutting machine and improve work efficiency

You Might Also Like

Send Inquiry