Aluminum profile end milling machine

Introduction:

The end milling machine is used for processing of end surface, stepped surface and end groove of aluminum and PVC profile. 30° to 90° any angle milling and cutting at profile end. The work table can be adjusted up and down, widely used for processing various profiles. Knife main shaft is connected by shaft coupling, thus the motor main shaft rotating not affect knife working accuracy. The feeding of knives is automatically driven by cylinder, which makes the machine work stable.

Parameters:

Power: 1.5kw
Voltage: 380V/50HZ
Air pressure: 0.5-0.8MPa
Rotation rate: 2800r/min
Saw size: D=200mm d=32mm