Shree Bhagwati is one of the world leader biggest manufacturer and exporter of labeling machines ,sticker labeling Labeling machine, self adhesive labeling Machines, labeller, wrap round labelling machine, washing and air jet cleaning machine, Rotary Washing Machine, injectable powder filling machines, dry syrup powder filling machines, liquid filling machines, vial filling machine, rotary filling machine, capping machines, ropp bottle capping machine, pp vial capping machine, rotary capping machine, complete tablet bottle packing lines, dry syrup powder filling lines, packaging machines and liquid filling lines for pharmaceutical, Pesticides, cosmetic, chemical, food, ayurvedic and herbal industry.

About Us

Client List

Product Range

	Washing Section

	Liquid Filling Section

	Powder Filling Section

	Capping Section

	Labelling Section

	Inspection Section

	Turn Table Section

	Blister Packing Section

	Tablet Section

	Tablet Press Section

	Tube Filling Section

	Other Products Section

An ISO 9001:2000 Company

Manufacturer and Exporter of Double Head Auger Type Powder Filling Machine.

Liquid Filling Section

Automatic Double Head Auger Type Powder Filling Machine SBAF-D-100

SBAF-D-100 Automatic Double Head Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation :

The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor from magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Salient Features :

Total Compact cGMP model.
All parts and assemblies coming in contact with powder are made of S.S.316
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor.
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
Total PLC control for the machine.
No change parts are required for any change in bottle diameter from 30 to 120 ml.

Utilities :(To be Provided by Buyer) :

Pneumatic Air

Filtered, oil free, sterile low pressure AIR at 6 kg/cm²

Basic Machine :

Imported Gear Motor for Conveyor drive.
A.C. Frequency drive for Conveyor drive.
"No Bottle, No Filling" System.
PLC control for machine.
Pneumatic bottle holding system.

Technical Specification :

Model	SBAF-D-100
Direction	Left To Right
Production Rate.	Up to 60 to 80 Bottles / Min.
Fill Capacity	10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy	± 2% depending upon consistency and the Uniformity of bulk density of powder Under controlled level of Humidity (i.e. 35%)
No. of Hads	Two
Electrical Supply	2.00 HP For Main Drive 0.25 HP For Conveyor.
Power Requirement	440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor	Adjustable from 850 to 900 MM
Dimensions	2200 MM (L) x 1102 MM (W) x 1817 MM (H)
Net Wight	550 KGS. (Approx.)
Gross Weight	800 KGS. (Approx.)

Input Specifications :

Bottle Conveyor	25 mm To 70 mm MAX.
Height	55 mm To 110 mm.

Note: (1) Right of technical improvements & modifications reserved.
(2) All illustrations and dimensions are shown for information only.

Back

Top

Liquid Filling Machine		MODELS
	Automatic Twin Head Liquid Filling with Rubber Stoppering Machine for Vials	SBVFS 80
	Automatic Four Head Liquid Filling with Rubber Stoppering Machine for Vials	SBVFS 120
	Automatic Six Head Liquid Filling with Rubber Stoppering Machine for Vials	SBVFS 150
	Automatic Eight Head Twin Track Liquid Filling with Rubber Stoppering Machine for Vials	SBVFS 250
	Automatic Twin Head Liquid Filling Machine for Vials	SBVFS 80
	Automatic Four Head Liquid Filling Machine for Vials	SBVFS 120
	Automatic Twin Head Liquid Filling with Capping Machine for Vials and Bottles
	Semi Automatic Twin Head Liquid Filling Machine
	Automatic Four Head Liquid Filling Machine for Bottles
	Automatic Six Head Liquid Filling Machine for Bottles
	Automatic Eight Head Liquid Filling Machine for Bottles
	Automatic Twin Track Twelve Head Liquid Filling Machine for Bottles
	Automatic Volumetric Liquid Bottle Filling	SBLF-150
	Automatic Multi Head Ropp Cap Sealing	SBCS-150
	Fully Automatic Sticker Labelling	SBSL-100 / 200 / 300
	Auto Self Adhesive Vial / Bottle Labelling	SBSL-150
	Semi Automatic Liquid Filling Machine
	Semi Automatic Electronic Liquid Filling Machine (For Bulk Filling, 1-15 Liters)
	Automatic Electronic Liquid Filling Machine (For Bulk Filling, 1-15 Ltrs.)
	Automatic Electronic Filling Machine (For Small Volume, 10-1000 ml)